Apple Watch Series 1 42mm LCD Glass Replacement

Product Details

If the glass is cracked or damaged on your Series 1 Apple Watch, this replacement glass is what you need to get it looking new again

Part Includes:

Replacement Glass
12 Month Warranty

Please Note

This Apple Watch Glass is not compatible with the 38mm version of the Series 1 Apple Watch

Caution

This is a tricky repair, check out videos prior to attempting this repair

Compatible Model Numbers

Apple Watch Series 1 42mm

Model Number (A Number)

A1803

Series 1 42mm Model NumbersHow do I find my Model number?

Model Identifier

Watch2,7

EMC Number

EMC 3103

Device Number (M Number)

MNNL2
MNNM2
MNNN2
MP032
MQ112
MQ122

* Please note, to make searching the device number (M Number) easier, we have only listed the part numbers (First 5 characters), we have removed the region numbers as there is no difference in parts. For example, if "M Number" is "MC922LL/A". we remove the "region" portion and everything after (the "LL/A" at the end) leaving us with "MC922".

More info Less info

Installation Help

Watch the video above for assistance in completing this repair

Here is some tools you may need to help you complete the repair.

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone ((+370)82324614) or by email

Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
Always power down your device prior to working on it
Make sure you always unplug the battery before attemping any component removal
When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
Test the LCD and touch is functioning properly before sealing together
When removing the screen, it is very easy to tear the force touch gasket. We recommend having a spare force touch gasket on hand incase this happens to prevent issues after replacement.
You can either use LOCA or OCA to stick the LCD and glass replacement together, OCA requires machines to remove bubbles etc, LOCA is the easiest for a DIY repair
Familiarise yourself with the repair first, this can be quite a tricky repair for first timers