bokotaforschoolboard

Apple Watch Magnetic Fast Charger to USB-C Cable (1m)

2023-06-15T16:44:19+12:00

Vendor: bokotaforschoolboard
Type: Parts
Price: 44.99

Product Details

If you're in the market for a replacement Apple Watch Magnetic Charger, you're often left with two choices; pay exorbitant prices for an original or gamble your device with a cheap knock off.

Don't risk the safety of your Apple Watch and don't pay crazy high prices for a new charger, either. We have genuine used Apple Watch magnetic fast charger that will give you the power you need at a reasonable price without the fear of using unregulated, unsafe chargers on your watch. When we say "genuine", we mean it — each charger is an original Apple product.

What can you expect from our used chargers?

Tagged and tested according to AS/NZS 3760 guidelines so that you can be assured of safety.
Good condition with no nicks, cuts, or fraying on cables.
A 12 month warranty to ensure that your device is protected and so you can buy with confidence.
Compatible with all Apple Watches but fast charging is only compatible for Apple Watch Series 7 and onwards

Get an original, genuine Apple charger for your watch at a price that won't break the bank and order today!

FYI

A USB-C power adapter is required to use this charger

Please Note

This is a used genuine Apple Watch Charger. It is compatible with all Apple Watches but fast charging is only compatible for Apple Watch Series 7 and above

Specifications

Part Type: Magnetic Charger
Compatibility: All Apple Watch
Length: 1m
Connection: USB C
Colour: White
Warranty: 12 Months

What’s In The Box

1x Apple Watch Magnetic Fast Charger (1m)

Apple Watch 38mm 2-in-1 Case and Screen Protector (Series 1, 2 & 3)

2022-08-22T23:28:54+12:00

Vendor: bokotaforschoolboard
Type: Screen Protector
Price: 15.00

Product Details

This iWatch cover is made with a built-in ultra-thin HD tempered glass screen protector, this clear case covers the full front and curved edges of the watch, provides overall protection from scuffs, scratches, drops, shatter, and bumps from daily wear in comparison to normal cases.

We made this cover to be easy to install and remove, it has a slim, bulk-free design that allows easy access into and out of your smartwatch. It also fits tightly around both the face and the sides of the watch and stays in place. It will not affect the band insertion as well.

To install the case, align your watch with the case and snap your watch into place by pushing it into each corner. It has an all-around fit that keeps your smartwatch full protection with shock absorption technology.

Please Note

Compatible with 38mm size Apple Watches only

Please Note

Moisture may get trapped between glass and screen during sports activities, please take off and wipe with dry cloth.

Specifications

Size: 38mm
Material: PC Shell, Tempered Glass Film
Colours: Black
Weight: 10g

What’s In The Box

1x Apple Watch 38mm 2-in-1 Case and Screen Protector

Apple Watch 38mm/40mm Screen Protector | Full Coverage TPU (Series 1-6)

2022-02-18T17:15:25+13:00

Vendor: bokotaforschoolboard
Type: Screen Protector
Price: 6.00

Product Details

TPU liquid skin - second skin that looks almost invisible on your watch
Self Healing - Small scratches and marks disappear after a couple of hours
100% Ultra HD Clarity - preserves original sharpness and vibrancy
Oleophobic and Hydrophobic Nano coating - repels oils, water, fingerprints and scratches
Retains full touchscreen responsiveness
Premium silicon adhesive that automatically sticks down to all corners of the protector
Specifically designed to provide maximum coverage from edge-to-edge

Specifications

Style: Full Coverage
Coating: Oleophobic and Hydrophobic
Type: Ultra Clear
Size: 38/40mm
Material: TPU

What’s In The Box

1x TPU 38mm/40mm Apple Watch Screen Protector
1x bokotaforschoolboard Cardboard packaging with Install Guide
1x Microfibre cleaning cloth
1x Alcohol cleaning pad
1x Dust removal stickers
1x Squeegee
1x Watch Stability Mount

Apple Watch Series 2/3 38mm LCD Glass Replacement

2021-12-21T19:47:22+13:00

Vendor: bokotaforschoolboard
Type: Parts
Price: 14.99

Product Details

If the glass is cracked or damaged on your Series 2/3 Apple Watch, this replacement glass is what you need to get it looking new again

Part Includes:

Replacement Glass
12 Month Warranty

Please Note

This Apple Watch Glass is not compatible with the 42mm version of the Series 2/3 Apple Watch

Caution

This is a tricky repair, check out videos prior to attempting this repair

Specifications

Part Type: Glass
Watch Size: 38mm
Warranty: 12 Months

What’s In The Box

1x Apple Watch Series 2/3 38mm LCD Glass replacement

Apple Watch 38mm Screen Protector | 3D Hybrid Glass Full Coverage (For Series 1, 2 & 3)

2021-09-21T15:15:24+12:00

Vendor: bokotaforschoolboard
Type: Screen Protector
Price: 10.00

Product Details

Smartwatch screens may be extra durable nowadays, but that does not mean they are fully resistant to cracking, shattering, and scratches. No matter how careful you are -- scratching your screen is pretty unavoidable.

There may be many screen protectors out there, but nothing comes close to our hybrid glass technology for your Series 1 (A1802), Series 2 (A1757, A1816) or Series 3 (A1858, A1860, A1889 & A1890) Apple Watch. Tempered glass has always been an issue on Apple watches, with touchscreen issues or the slightest knock causing rippled cracks. The hybrid glass is thin and flexible for perfect touch and no cracks

Amazing Hybrid glass technology - Strength of Acrylic glass mixed with the fleixbility of PET materials
Never cracks! Feels and looks like glass but without the easy breakage and touchscreen issues
100% Ultra HD Clarity - preserves original sharpness and vibrancy
Oleophobic and Hydrophobic Nano coating - repels oils, water, fingerprints and scratches
Retains full touchscreen responsiveness
5 Layers - Explosion-Proof Film, Silicon Coating, Premium PMMA acrylic glass, PET Film, Nano Structured Coating
Premium silicon adhesive that automatically sticks down to all corners of the protector
Smooth 3D curved edging which stops the edges from chipping and is perfectly shaped to fit the contours of the screen

Specifications

Style: 3D Full Coverage
Coating: Oleophobic and Hydrophobic
Type: Ultra Clear
Size: 38mm
Edging: 3D Contoured
Material: Hybrid Glass (PMMA+PET)
Colours: Black

What’s In The Box

1x Hybrid Glass 38mm Apple Watch Screen Protector
1x bokotaforschoolboard Cardboard packaging with Install Guide
1x Microfibre cleaning cloth
1x Alcohol cleaning pad
1x Dust removal stickers
1x Squeegee

Apple Watch Series 2 & Series 3 38mm Glass and Digitiser with Touchscreen Flex Replacement

2021-02-13T13:37:10+13:00

Vendor: bokotaforschoolboard
Type: Parts
Price: 54.99

Product Details

If the glass is cracked or damaged on your Series 2 or 3 Apple Watch, this replacement glass and touchscreen is what you need to get it looking new again

Part Includes:

Replacement Glass
OEM Touch Digitiser with flex cable
12 Month Warranty

Please Note

This Apple Watch Glass and Digitiser is not compatible with the 42mm version of the Series 2 & Series 3 Apple Watch

Caution

This is a tricky repair, check out videos prior to attempting this repair

Specifications

Part Type: Glass and Digitiser
Watch Size: 38mm
Warranty: 12 Months

What’s In The Box

1x Apple Watch Series 2 & Series 3 38mm Glass and Digitiser replacement

Apple Watch Series 3 38mm OLED Screen Replacement (GPS)

2021-02-12T22:53:49+13:00

Vendor: bokotaforschoolboard
Type: Parts
Price: 169.99

Replacement OLED Screen
38mm OLED Retina Display; 272 x 340 pixel display
12 Month Warranty
Compatible with Apple Watch Series 3 model; A1858

Product Details

If your front glass is scratched or cracked or the OLED screen is damaged on your Series 3 Cellular Apple Watch, this replacement screen may be what you need to fix it.

Part Features:

OEM 272 x 340 38mm OLED Display
326ppi, 1000 cd/m2
Touch Screen Digitiser
3x ZIF connectors

Warning

When you replace the screen on the series 3 Apple Watch, you may lose Apple Pay functionality. You can transfer the NFC chip from the old screen to new screen to keep this function, but this requires microsoldering

Please Note

This Apple Watch OLED Screen is not compatible with the 38mm LTE version or 42mm versions of the Series 3 Apple Watch

Please Note

This part will either be refurbished or an A-Grade Used Genuine Apple replacement

Specifications

Part Type: OLED Replacement Screen
Resolution: 272 x 340
Pixel Density: 326 ppi
Watch Size: 38mm
Brightness: 1000 cd/m2
Warranty: 12 Months

Compatible Model Numbers

Apple Watch Series 3 GPS 38mm

Model Number (A Number)

A1858

Series 3 38mm GPS Model NumbersHow do I find my Model number?

Model Identifier

Watch3,3

EMC Number

EMC 3165

Device Number (M Number)

MQKU2
MQKV2
MQKW2
MQKX2
MQKY2
MR352

* Please note, to make searching the device number (M Number) easier, we have only listed the part numbers (First 5 characters), we have removed the region numbers as there is no difference in parts. For example, if "M Number" is "MC922LL/A". we remove the "region" portion and everything after (the "LL/A" at the end) leaving us with "MC922".

More info Less info

Installation Help

Watch the video above or the step-by-step guid below for assistance in completing this repair

iFixit Apple Watch Series 3 Screen Replacement Guide

Here is some tools you may need to help you complete the repair.

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone ((+370)82324614) or by email

Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
Always power down your device prior to working on it
Make sure you always unplug the battery before attemping any component removal
When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
Test the LCD is functioning properly before sealing up the device
When removing the screen, it is very easy to tear the force touch gasket. We recommend having a spare force touch gasket on hand incase this happens to prevent issues after replacement.
The Apple Watch Series 3 watches may lose Apple Pay functionality when the screen is replaced. You can keep functionality by transferring the NFC chip from your old screen to new one. This requries microsoldering

What’s In The Box

1x Apple Watch Series 3 38mm GPS OLED Screen Replacement

Apple Watch Series 3 38mm LCD Screen Adhesive

2021-01-24T10:29:06+13:00

Vendor: bokotaforschoolboard
Type: Parts
Price: 4.99

Brand New Replacement LCD Screen Adhesive
Compatible with Apple Watch Series 3 models; A1858, A1860, A1889 & A1890

Product Details

If you've opened up your Series 3 Apple Watch for repair, you'll need to replace the adhesive so that you can seal it back up.

Part Includes:

3M LCD adhesive
12 Month Warranty

Please Note

This Apple Watch LCD adhesive is not compatible with the 42mm version of the Series 3 Apple Watch

Specifications

Part Type: LCD adhesive
Watch Size: 38mm
Warranty: 12 Months

Compatible Model Numbers

Apple Watch Series 3 GPS 38mm

Model Number (A Number)

A1858

Series 3 38mm GPS Model NumbersHow do I find my Model number?

Model Identifier

Watch3,3

EMC Number

EMC 3165

Device Number (M Number)

MQKU2
MQKV2
MQKW2
MQKX2
MQKY2
MR352

More info Less info

Apple Watch Series 3 GPS + Cellular 38mm

Model Number (A Number)

A1860
A1889
A1890

Series 3 38mm GPS+LTE Model NumbersHow do I find my Model number?

Model Identifier

Watch3,1

EMC Number

EMC 3169
EMC 3170

Device Number (M Number)

MQJN2
MQJP2
MQJQ2
MQJR2
MQJT2
MQJU2
MQJV2
MQJW2
MQJY2
MQK02
MQKF2
MQKH2
MQKJ2
MQKK2
MQKL2
MQKN2
MQL52
MQL62
MQL72
MQL82
MQLJ2
MQLK2
MQLM2
MQLN2
MQLV2
MQLW2
MQM32
MQM42
MQM72
MQM82
MQM92
MQMA2
MQML2
MQMM2
MQMP2
MQMQ2
MQQE2
MQQF2
MQQG2
MQQH2
MQQJ2
MQQK2
MQQL2
MQQM2
MQQP2
MQQQ2
MQR42
MQR52
MQR62
MQR72
MQRA2
MQRE2
MQRF2
MQX92
MR1F2
MR1H2
MR1N2
MR1Q2
MR212
MR222
MR2W2
MR2Y2
MR332

More info Less info

Installation Help

Watch the video above or checkout the guide below for assistance in completing this repair

iFixit Apple Watch LCD adhesive replacement

Here is some tools you may need to help you complete the repair.

Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
Test the LCD is functioning properly before sealing up the device
When removing the screen, it is very easy to tear the force touch gasket. We recommend having a spare force touch gasket on hand incase this happens to prevent issues after replacement.

What’s In The Box

1x Apple Watch Series 3 38mm LCD adhesive

Apple Watch Series 3 38mm (GPS) LCD Flex Cable Replacement with Power Button

2021-01-15T16:38:35+13:00

Vendor: bokotaforschoolboard
Type: Parts
Price: 19.99

Brand New LCD Flex Cable Replacement
Includes Power button, LCD flex cables and microphone
Compatible with Apple Watch Series 3 GPS model; A1858

Product Details

If your LCD flex cable is torn or damaged on your Series 3 GPS Apple Watch, this replacement flex may be what you need to fix it.

Part Includes:

Microphone
LCD Flex cables
Power Button
12 Month Warranty

Please Note

This Apple Watch LCD flex is not compatible with the 38mm GPS+LTE version or 42mm versions of the Series 3 Apple Watch

Caution

Microsoldering is required to install this part

Specifications

Part Type: Flex Cable
Part Number: 821-01543
Included: LCD flex cables, microphone, power button
Watch Size: 38mm
Watch Type: GPS only
Warranty: 12 Months

Compatible Model Numbers

Apple Watch Series 3 GPS 38mm

Model Number (A Number)

A1858

Series 3 38mm GPS Model NumbersHow do I find my Model number?

Model Identifier

Watch3,3

EMC Number

EMC 3165

Device Number (M Number)

MQKU2
MQKV2
MQKW2
MQKX2
MQKY2
MR352

More info Less info

Installation Help

Watch the video above for assistance in completing this repair

Here is some tools you may need to help you complete the repair.

Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
Always power down your device prior to working on it
Make sure you always unplug the battery before attemping any component removal
When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
Test the LCD is functioning properly before sealing up the device
When removing the screen, it is very easy to tear the force touch gasket. We recommend having a spare force touch gasket on hand incase this happens to prevent issues after replacement.
Micro-soldering skills are required to complete this repair

What’s In The Box

1x Apple Watch Series 3 38mm GPS LCD Flex Cable

Apple Watch Series 3 38mm (GPS) Force Touch Gasket with Adhesive

2021-01-14T16:03:35+13:00

Vendor: bokotaforschoolboard
Type: Parts
Price: 13.99

Replacement force touch for 38mm Series 3 GPS Apple Watch
Includes precut adhesive for adhering the screen to the chassis
Compatible with Apple Watch Series 3 model; A1858

Product Details

When working on the inside of your 38mm Apple Watch Series 3 model, it is easy to cut the force touch sensor when attempting to remove the screen. Restore force touch functions while also adhering the screen to the chassis with this gasket, no need to cut and shape new adhesive to fit the frame, it is precut to size!

Installation adhesive for the two sides of the gasket is pre-attached.

Please Note

This Apple Watch force touch gasket is not compatible with the 38mm GPS+Cellular version or the 42mm versions of the Series 3 Apple Watch

Specifications

Adhesive Type: Double-sided
Gasket Size: 38mm
Watch Type: GPS only
Warranty: 12 Months

Compatible Model Numbers

Apple Watch Series 3 GPS 38mm

Model Number (A Number)

A1858

Series 3 38mm GPS Model NumbersHow do I find my Model number?

Model Identifier

Watch3,3

EMC Number

EMC 3165

Device Number (M Number)

MQKU2
MQKV2
MQKW2
MQKX2
MQKY2
MR352

More info Less info

Installation Help

Watch the video above or checkout the step-by-step guide below for assistance in completing this repair

iFixit Apple Watch Series 3 Force Touch Replacement Guide

Here is some tools you may need to help you complete the repair.

Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
Always power down your device prior to working on it
Make sure you always unplug the battery before attemping any component removal
Before removing your battery, discharge the battery to below 25%. A charged lithium-ion battery can catch fire or explode if punctured or damaged
When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
Make sure you align and place the gasket the right way up so it clips in correctly on the watch, take note of how the previous force touch was placed
Make sure all residue is removed and cleaned prior to installing the new adhesive, if not done correctly the screen may seperate from the frame. We recommend cleaning the frame with isopropyl alchohol wipes

Caution

If the battery in your device is swollen or damaged during repair, take the proper precautions

What’s In The Box

1x Apple Watch Series 3 38mm GPS Force Touch Gasket and Adhesive

Apple Watch Series 3 38mm (GPS) Battery Flex Cable Replacement with microphone

2021-01-14T14:42:01+13:00

Vendor: bokotaforschoolboard
Type: Parts
Price: 14.99

Brand New
Replace a torn or damaged battery flex cable
Compatible with Apple Watch Series 3 GPS model; A1858

Product Details

If your battery flex cable is torn or damaged on your Series 3 GPS Apple Watch, this replacement flex may be what you need to fix it.

Part Includes:

Microphone
Battery FPC connector
Flex Cable
12 Month Warranty

Please Note

This Apple Watch microphone flex is not compatible with the 38mm GPS+LTE version or 42mm versions of the Series 3 Apple Watch

Caution

Microsoldering is required to install this part

Specifications

Part Type: Flex Cable
Watch Size: 38mm
Watch Type: GPS only
Warranty: 12 Months

Compatible Model Numbers

Apple Watch Series 3 GPS 38mm

Model Number (A Number)

A1858

Series 3 38mm GPS Model NumbersHow do I find my Model number?

Model Identifier

Watch3,3

EMC Number

EMC 3165

Device Number (M Number)

MQKU2
MQKV2
MQKW2
MQKX2
MQKY2
MR352

More info Less info

Installation Help

Here is some tools you may need to help you complete the repair.

Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
Always power down your device prior to working on it
Make sure you always unplug the battery before attemping any component removal
When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
Test the battery is functioning properly before sealing up the device
When removing the screen, it is very easy to tear the force touch gasket. We recommend having a spare force touch gasket on hand incase this happens to prevent issues after replacement.
Micro-soldering skills are required to complete this repair

What’s In The Box

1x Apple Watch Series 3 38mm GPS Battery Flex Cable

Apple Watch Series 3 38mm (GPS) Battery Replacement A1847

2020-12-17T22:09:25+13:00

Vendor: bokotaforschoolboard
Type: Parts
Price: 24.99

Replacement battery for 38mm Series 3 GPS Apple Watch
Lithium Ion Polymer
Voltage: 3.81V, 1.0Whr, Capacity: 262MaH
Compatible with Apple Watch Series 3 model; A1858

Product Details

If your Series 3 Apple Watch won't turn on, is stuck in a boot loop, or simply won't hold a charge, this replacement battery may be what you need to fix it.

Zero Cycle Count, therefore you have the maximum amount of cycles left
Lithium-Ion Polymer
Brand New materials
Strict QC testing
Less than 1% failure rate
12 Month Warranty

Includes pre-installaed adhesive that allows you to glue down the battery into your chassis easily

OEM Battery adhesive is included
Convenient
Easy-to-use

Please Note

This Apple Watch battery is not compatible with the 38mm GPS+LTE Series 3 or 42mm Series 3 Apple Watch versions

Please Note

This battery will either be new or a Apple genuine grade A used battery

Specifications

Compatible Part Numbers: A1847
Voltage: 3.81V
Watt Hours: 1.0Whr
Capacity: 262mAh
Watch Version: GPS only
Watch Size: 38mm
Battery Type: Li-Polymer
Warranty: 12 Months

Compatible Model Numbers

Apple Watch Series 3 GPS 38mm

Model Number (A Number)

A1858

Series 3 38mm GPS Model NumbersHow do I find my Model number?

Model Identifier

Watch3,3

EMC Number

EMC 3165

Device Number (M Number)

MQKU2
MQKV2
MQKW2
MQKX2
MQKY2
MR352

More info Less info

Installation Help

Watch the video above or checkout the step-by-step guide below for assistance in completing this repair

iFixit Apple Watch Series 3 Battery Replacement Guide

Remember

After completing your repair, calibrate your newly installed battery by charging it to 100% and then charging for a further two hours. Use your Apple Watch until it shuts off due to low battery, and finally, charge it uninterrupted to 100% again

Here is some tools you may need to help you complete the repair.

Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your watch and tape the screws to the right places or use a screw mat
Always power down your device prior to working on it
Make sure you always unplug the battery before attemping any component removal
Before removing your battery, discharge the battery to below 25%. A charged lithium-ion battery can catch fire or explode if punctured or damaged
When attempting to remove the screen, be careful not to push the blade or iFlex tool in too far or too hard, doing so may cause damage to the internal parts. Only 3mm depth is required to cut the adhesive. Draw a mark on your tool to help with depth management.
Test the battery is functioning properly before sealing up the device
When removing the battery with a pry bar, be careful not to go down too far as the screen flex cables route underneath the battery. Measure the depth of the new battery, then on a plastic pick, measure and draw a line to assist with depth management
When removing the screen, it is very easy to tear the force touch gasket. We recommend having a spare force touch gasket on hand incase this happens to prevent issues after replacement.

Caution

If the new battery or the battery in your device is swollen or damaged during repair, take the proper precautions

Note

You cannot dispose of old batteries in your general waste. Find recycling e-waste centres online or take to your local refuse station.

What’s In The Box

1x Apple Watch Series 3 38mm GPS Replacement Battery