These clips aligns and hold the volume and power buttons. If bent it will need replacing or could cause damage to the power and volume buttons or stop the buttons being seated correctly.

Part Includes:

• 1x Power button clip
• 2x Volume button clips

• Part Type: Replacement Volume and Power Button Clips
• Warranty: 12 Months

• 3x iPhone X-15 Pro Max Volume and Power Button Clips

• Screen Type: HD OLED
• Display Size: 6.1"
• Resolution: 2556 × 1179 pixels
• True Tone Capable: Yes
• Colours: Black
• Brightness: 800 cd/m2
• Glass Rating: 9H
• Warranty: 12 Months

• 1x iPhone 14 Pro OEM Screen Replacement
• 1x iPhone 14 Pro Screen Gasket Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

• Screen Type: HD OLED
• Display Size: 6.7"
• Resolution: 2778 × 1284 pixels
• True Tone Capable: Yes
• Colours: Black
• Brightness: 800 cd/m2
• Glass Rating: 9H
• Warranty: 12 Months

• 1x iPhone 14 Plus OEM Screen Replacement
• 1x iPhone 14 Plus Screen Gasket Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

• Screen Type: HD OLED
• Display Size: 6.1"
• Resolution: 2532 × 1170 pixels
• True Tone Capable: Yes
• Colours: Black
• Brightness: 800 cd/m2
• Glass Rating: 9H
• Warranty: 12 Months

• 1x iPhone 14 OEM Screen Replacement
• 1x iPhone 14 Screen Gasket Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

If Wireless Charging of your iPhone 11 is not working properly, this wireless charging antenna may fix the problem.

Includes:

• Wireless Charging Antenna Coil

• Part Type: Wireless Charging Antenna
• Connection Type: solder pads
• Warranty: 12 Months

• 1x iPhone 11 Wireless Charging Antenna

If Wireless Charging of your iPhone X is not working properly, this wireless charging antenna may fix the problem.

Includes:

• Wireless Charging Antenna Coil

• Part Type: Wireless Charging Antenna
• Connection Type: solder pads
• Warranty: 12 Months

• 1x iPhone X Wireless Charging Antenna

Replace a malfunctioning earpiece speaker and fix problems with phone call audio on your iPhone 8, SE 2020 or SE 2022. Speaker problems can occur from water damage, excess dust or a blown speaker.

Part includes:

• Top earpiece speaker
• Spring contacts
• Earpiece mesh replacement
• 12 Month Warranty

• Part Type: Top Speaker
• Warranty: 12 Months

• 1x iPhone 8/ iPhone SE 2020/ iPhone SE 2022 Replacement Top Speaker
• 1x Earpiece Speaker mesh

This iPhone XR Back Glass Replacement includes the camera lens components so the back of your phone looks new again.

Includes:

• Rear Glass
• Rear-Facing Camera Internal Metal Frame
• Rear-Facing Coloured Camera Bezel
• Rear-Facing Camera Lens Glass

This item fixes the following issues:

• cracked rear glass
• changing the colour of your iPhone XR
• smashed camera lens and/or frame

• Type: Camera lens included
• Adhesive: Not included
• Warranty: 12 Months

• 1x iPhone XR Rear Glass with camera lens

Do you have problems with your volume buttons or ringer/vibrate switch? This part is what you need to get those buttons working again.

This flex cable connects the volume and mute switch to the logic board and the Wireless charging coil

Includes:

• Internal Volume Contacts
• Vibrate/Ring Mute button switch
• Flex Cable
• Wireless Charging Antenna Coil
• Metal Brackets behind switches

• Part Type: Volume Flex cable with Wireless charging coil
• Connection Type: FPC connector
• Warranty: 12 Months

• 1x iPhone 14 Pro Max Volume flex cable with mute switch and Wireless charging coil

Do you have problems with your volume buttons or ringer/vibrate switch? This part is what you need to get those buttons working again.

This flex cable connects the volume and mute switch to the logic board and the Wireless charging coil

Includes:

• Internal Volume Contacts
• Vibrate/Ring Mute button switch
• Flex Cable
• Wireless Charging Antenna Coil
• Metal Brackets behind switches

• Part Type: Volume Flex cable with Wireless charging coil
• Connection Type: FPC connector
• Warranty: 12 Months

• 1x iPhone 14 Pro Volume flex cable with mute switch and Wireless charging coil

Do you have problems with your flashlight? This part is what you need to get your flashlight working again.

This flex cable connects the flashlight to the logic board and the Wireless charging coil

Includes:

• Flash Light
• Flex Cable
• Wireless Charging Antenna Coil
• Metal Brackets behind switches

• Part Type: Flash Light cable with Wireless charging coil
• Connection Type: FPC connector
• Warranty: 12 Months

• 1x iPhone 14 Plus Flash Light flex cable and Wireless charging coil

Do you have problems with your flashlight? This part is what you need to get your flashlight working again.

This flex cable connects the flashlight to the logic board and the Wireless charging coil

Includes:

• Flash Light
• Flex Cable
• Wireless Charging Antenna Coil
• Metal Brackets behind switches

• Part Type: Flash Light cable with Wireless charging coil
• Connection Type: FPC connector
• Warranty: 12 Months

• 1x iPhone 14 Flash Light flex cable and Wireless charging coil

If your iPhone 14 Pro Max won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.

A typical cellphone battery has about 500 cycles before it is unable to maintain a charge of at least 80% of its original capacity. Made from new materials, our batteries have zero cycles ensuring the maximum number of cycles available to you.

• Zero Cycle Count, therefore you have the maximum amount of cycles left
• Lithium-Ion Polymer
• Brand New materials
• Strict QC testing
• Less than 1% failure rate
• 12 Month Warranty

The OEM Texas Instruments chip (also known as the 'gas gauge') measures and accurately communicates available capacity, voltage, current, temperature and other critical parameters for lithium-ion batteries.  An inadequate battery gas gauge will result in surprise shutdowns, overcharging, poor user experience and will ultimately lead to a quicker deterioration of your battery

• Genuine OEM Texas Instruments Chipset (TIIC)
• Accurate Communication to your device
• Superior charging control - Stabilises charging, discharging and overcharging

bokotaforschoolboard's OEM battery adhesive allows you to glue down the battery into your chassis while leaving pull tabs for you to be able to remove the battery if you need to later on

• OEM Battery adhesive is included
• Convenient
• Easy-to-use

Please Note

After replacing your battery, the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than the Battery Health not reporting the health status of the battery

• Compatible Part Numbers: A2830
• Voltage: 3.86V
• Watt Hours: 16.68Whr
• Capacity: 3200mAh
• Chipset: Texas Instruments
• Battery Type: Li-Polymer
• Warranty: 12 Months

• 1x iPhone 14 Pro Max Replacement Battery
• 1x Replacement Battery Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

If your iPhone 14 Plus won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.

A typical cellphone battery has about 500 cycles before it is unable to maintain a charge of at least 80% of its original capacity. Made from new materials, our batteries have zero cycles ensuring the maximum number of cycles available to you.

• Zero Cycle Count, therefore you have the maximum amount of cycles left
• Lithium-Ion Polymer
• Brand New materials
• Strict QC testing
• Less than 1% failure rate
• 12 Month Warranty

The OEM Texas Instruments chip (also known as the 'gas gauge') measures and accurately communicates available capacity, voltage, current, temperature and other critical parameters for lithium-ion batteries.  An inadequate battery gas gauge will result in surprise shutdowns, overcharging, poor user experience and will ultimately lead to a quicker deterioration of your battery

• Genuine OEM Texas Instruments Chipset (TIIC)
• Accurate Communication to your device
• Superior charging control - Stabilises charging, discharging and overcharging

bokotaforschoolboard's OEM battery adhesive allows you to glue down the battery into your chassis while leaving pull tabs for you to be able to remove the battery if you need to later on

• OEM Battery adhesive is included
• Convenient
• Easy-to-use

Please Note

After replacing your battery, the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than the Battery Health not reporting the health status of the battery

• Compatible Part Numbers: A2850
• Voltage: 3.86V
• Watt Hours: 16.68Whr
• Capacity: 3279mAh
• Chipset: Texas Instruments
• Battery Type: Li-Polymer
• Warranty: 12 Months

• 1x iPhone 14 Plus Replacement Battery
• 1x Replacement Battery Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

If your iPhone 14 Pro won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.

A typical cellphone battery has about 500 cycles before it is unable to maintain a charge of at least 80% of its original capacity. Made from new materials, our batteries have zero cycles ensuring the maximum number of cycles available to you.

• Zero Cycle Count, therefore you have the maximum amount of cycles left
• Lithium-Ion Polymer
• Brand New materials
• Strict QC testing
• Less than 1% failure rate
• 12 Month Warranty

The OEM Texas Instruments chip (also known as the 'gas gauge') measures and accurately communicates available capacity, voltage, current, temperature and other critical parameters for lithium-ion batteries.  An inadequate battery gas gauge will result in surprise shutdowns, overcharging, poor user experience and will ultimately lead to a quicker deterioration of your battery

• Genuine OEM Texas Instruments Chipset (TIIC)
• Accurate Communication to your device
• Superior charging control - Stabilises charging, discharging and overcharging

bokotaforschoolboard's OEM battery adhesive allows you to glue down the battery into your chassis while leaving pull tabs for you to be able to remove the battery if you need to later on

• OEM Battery adhesive is included
• Convenient
• Easy-to-use

Please Note

After replacing your battery, the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than the Battery Health not reporting the health status of the battery

• Compatible Part Numbers: A2866
• Voltage: 3.87V
• Watt Hours: 12.38Whr
• Capacity: 3200mAh
• Chipset: Texas Instruments
• Battery Type: Li-Polymer
• Warranty: 12 Months

• 1x iPhone 14 Pro Replacement Battery
• 1x Replacement Battery Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

If your iPhone 14 won't turn on, is stuck in a boot loop, has a "service battery" warning, or simply won't hold a charge, this replacement battery may be what you need to fix it.

A typical cellphone battery has about 500 cycles before it is unable to maintain a charge of at least 80% of its original capacity. Made from new materials, our batteries have zero cycles ensuring the maximum number of cycles available to you.

• Zero Cycle Count, therefore you have the maximum amount of cycles left
• Lithium-Ion Polymer
• Brand New materials
• Strict QC testing
• Less than 1% failure rate
• 12 Month Warranty

The OEM Texas Instruments chip (also known as the 'gas gauge') measures and accurately communicates available capacity, voltage, current, temperature and other critical parameters for lithium-ion batteries.  An inadequate battery gas gauge will result in surprise shutdowns, overcharging, poor user experience and will ultimately lead to a quicker deterioration of your battery

• Genuine OEM Texas Instruments Chipset (TIIC)
• Accurate Communication to your device
• Superior charging control - Stabilises charging, discharging and overcharging

bokotaforschoolboard's OEM battery adhesive allows you to glue down the battery into your chassis while leaving pull tabs for you to be able to remove the battery if you need to later on

• OEM Battery adhesive is included
• Convenient
• Easy-to-use

Please Note

After replacing your battery, the Battery Health feature on your phone will display "Service" and a message about needing to have your phone checked by an authorized service provider. Rest assured that the battery and your phone are fine. iOS shows this message anytime a battery is replaced by anyone other than an authorized service provider. Your phone will function 100% normally other than the Battery Health not reporting the health status of the battery

• Compatible Part Numbers: A2863
• Voltage: 3.87V
• Watt Hours: 12.86Whr
• Capacity: 3279mAh
• Chipset: Texas Instruments
• Battery Type: Li-Polymer
• Warranty: 12 Months

• 1x iPhone 14 Replacement Battery
• 1x Replacement Battery Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

• Screen Type: HD OLED
• Display Size: 6.7"
• Resolution: 2796 x 1290 pixels
• True Tone Capable: Yes
• Colours: Black
• Brightness: 800 cd/m2
• Glass Rating: 9H
• Warranty: 12 Months

• 1x iPhone 14 Pro Max OEM Screen Replacement
• 1x iPhone 14 Pro Max Screen Gasket Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

• AMAZING IN-CELL TECHNOLOGY - Includes In-Cell Technology which has the LCD, Touchscreen and 3D Touch in the same sensor layer. You don't have to use the cheap aftermarket Out-Of-Cell Screens (OOC) anymore. No more intermittent or delayed touch, no more dull cold colours or shadows around the edge of the screen. 
• COF BONDING PROCESS - The industry leading Chip-on-Flex bonding process allows the cable to be more flexible in positioning which allows for a thinner bezel and greater screen size to match the dimensions of the original
• PREMIUM LCD - Our bokotaforschoolboard IC3 range includes a premium TFT LCD with brighter colours, whiter whites and darker blacks than other aftermarket LCD screens available
• ILLUMINATION UNIFORMITY - The combination of the premium LCD and the In-Cell Technology means you get illumination uniformity. A side-effect of the OOC screens is shadows and dark patches around the edge of the screen due to the distance between screen and glass. The IC3 has a uniform colour and brightness across the whole screen.
• INTEGRATED DRIVER CONTROL - Our bokotaforschoolboard IC3 range requires only one Integrated Driver Controller IC (IDC) to perform display, touch and 3D touch functions simultaneously, enhancing power efficiency, brightness, color and contrast.
• QUALITY MATERIALS - Our bokotaforschoolboard IC3 screens have been thoughtfully designed and constructed from superior quality materials. The TFT LCD is equipped with superior circuitry and components which delivers a premium product quality. This is coupled with rigorous testing procedures to ensure bokotaforschoolboard IC3 screens outperform standard LCD screens.
• PRECISE CUTOUTS - The dimensions and cutouts are accurate to the Original. The technicians have meticulously worked to make sure all dimensions are exact so installation is a breeze.
• TRUE TONE CAPABLE - Apple's true tone feature is lost when you change screens. bokotaforschoolboard IC3 screens are capable of keeping the True Tone feature if you use a transfer machine
• COST EFFECTIVE - bokotaforschoolboard IC3 screens a much cheaper alternative to the Original OLED screens, saving you money without costing you in quality.

• Screen Type: TFT LCD
• Touch System Type: In-Cell
• Backlight Type: 3M ESR Brightness enhancer
• Display Size: 6.7"
• True Tone Capable: Yes
• Colour Gamut: DCI-P3
• Colour Temp: 6500-7500k
• Colours: Black
• Brightness: 550 cd/m2
• Glass Rating: 9H
• Warranty: 12 Months

• 1x iPhone 13 Pro Max IC3 Screen Replacement
• 1x iPhone 13 Pro Max Screen Gasket Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

• AMAZING IN-CELL TECHNOLOGY - Includes In-Cell Technology which has the LCD, Touchscreen and 3D Touch in the same sensor layer. You don't have to use the cheap aftermarket Out-Of-Cell Screens (OOC) anymore. No more intermittent or delayed touch, no more dull cold colours or shadows around the edge of the screen. 
• COF BONDING PROCESS - The industry leading Chip-on-Flex bonding process allows the cable to be more flexible in positioning which allows for a thinner bezel and greater screen size to match the dimensions of the original
• PREMIUM LCD - Our bokotaforschoolboard IC3 range includes a premium TFT LCD with brighter colours, whiter whites and darker blacks than other aftermarket LCD screens available
• ILLUMINATION UNIFORMITY - The combination of the premium LCD and the In-Cell Technology means you get illumination uniformity. A side-effect of the OOC screens is shadows and dark patches around the edge of the screen due to the distance between screen and glass. The IC3 has a uniform colour and brightness across the whole screen.
• INTEGRATED DRIVER CONTROL - Our bokotaforschoolboard IC3 range requires only one Integrated Driver Controller IC (IDC) to perform display, touch and 3D touch functions simultaneously, enhancing power efficiency, brightness, color and contrast.
• QUALITY MATERIALS - Our bokotaforschoolboard IC3 screens have been thoughtfully designed and constructed from superior quality materials. The TFT LCD is equipped with superior circuitry and components which delivers a premium product quality. This is coupled with rigorous testing procedures to ensure bokotaforschoolboard IC3 screens outperform standard LCD screens.
• PRECISE CUTOUTS - The dimensions and cutouts are accurate to the Original. The technicians have meticulously worked to make sure all dimensions are exact so installation is a breeze.
• TRUE TONE CAPABLE - Apple's true tone feature is lost when you change screens. bokotaforschoolboard IC3 screens are capable of keeping the True Tone feature if you use a transfer machine
• COST EFFECTIVE - bokotaforschoolboard IC3 screens a much cheaper alternative to the Original OLED screens, saving you money without costing you in quality.

• Screen Type: TFT LCD
• Touch System Type: In-Cell
• Backlight Type: 3M ESR Brightness enhancer
• Display Size: 6.1"
• True Tone Capable: Yes
• Colour Gamut: DCI-P3
• Colour Temp: 6500-7500k
• Colours: Black
• Brightness: 550 cd/m2
• Glass Rating: 9H
• Warranty: 12 Months

• 1x iPhone 13 Pro IC3 Screen Replacement
• 1x iPhone 13 Pro Screen Gasket Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

• AMAZING IN-CELL TECHNOLOGY - Includes In-Cell Technology which has the LCD, Touchscreen and 3D Touch in the same sensor layer. You don't have to use the cheap aftermarket Out-Of-Cell Screens (OOC) anymore. No more intermittent or delayed touch, no more dull cold colours or shadows around the edge of the screen. 
• COF BONDING PROCESS - The industry leading Chip-on-Flex bonding process allows the cable to be more flexible in positioning which allows for a thinner bezel and greater screen size to match the dimensions of the original
• PREMIUM LCD - Our bokotaforschoolboard IC3 range includes a premium TFT LCD with brighter colours, whiter whites and darker blacks than other aftermarket LCD screens available
• ILLUMINATION UNIFORMITY - The combination of the premium LCD and the In-Cell Technology means you get illumination uniformity. A side-effect of the OOC screens is shadows and dark patches around the edge of the screen due to the distance between screen and glass. The IC3 has a uniform colour and brightness across the whole screen.
• INTEGRATED DRIVER CONTROL - Our bokotaforschoolboard IC3 range requires only one Integrated Driver Controller IC (IDC) to perform display, touch and 3D touch functions simultaneously, enhancing power efficiency, brightness, color and contrast.
• QUALITY MATERIALS - Our bokotaforschoolboard IC3 screens have been thoughtfully designed and constructed from superior quality materials. The TFT LCD is equipped with superior circuitry and components which delivers a premium product quality. This is coupled with rigorous testing procedures to ensure bokotaforschoolboard IC3 screens outperform standard LCD screens.
• PRECISE CUTOUTS - The dimensions and cutouts are accurate to the Original. The technicians have meticulously worked to make sure all dimensions are exact so installation is a breeze.
• TRUE TONE CAPABLE - Apple's true tone feature is lost when you change screens. bokotaforschoolboard IC3 screens are capable of keeping the True Tone feature if you use a transfer machine
• COST EFFECTIVE - bokotaforschoolboard IC3 screens a much cheaper alternative to the Original OLED screens, saving you money without costing you in quality.

• Screen Type: TFT LCD
• Touch System Type: In-Cell
• Backlight Type: 3M ESR Brightness enhancer
• Display Size: 6.1"
• True Tone Capable: Yes
• Colour Gamut: DCI-P3
• Colour Temp: 6500-7500k
• Colours: Black
• Brightness: 550 cd/m2
• Glass Rating: 9H
• Warranty: 12 Months

• 1x iPhone 14 Pro IC3 Screen Replacement
• 1x iPhone 14 Pro Screen Gasket Adhesive
• 1x Simple replacement toolkit
• 1x Small plastic handle phillips #000 screwdriver
• 1x Small plastic handle P2 pentalobe screwdriver
• 1x Small plastic handle Y000 Triwing screwdriver
• 1x Small plastic handle flathead screwdriver
• 1x Small suction cup
• 1x Small blue spudger
• 1x Opening pick

If you've smashed or scratched your rear camera lens on your iPhone 15/15 Plus, you will need to replace the glass camera lens.

Product Features:

• 100% Brand New
• 2x Camera lens inner pieces
• includes adhesive

• Type: Glass Replacement
• Warranty: 12 Months

• 2x iPhone 15/15 Plus Camera lens replacement
• 2x round adhesive strips

If you've smashed or scratched your rear camera lens on your iPhone 15 Pro, you will need to replace the glass camera lens.

Product Features:

• 100% Brand New
• 3x Camera lens inner pieces
• includes adhesive

• Type: Glass Replacement
• Warranty: 12 Months

• 3x iPhone 15 Pro Camera lens replacement
• 3x round adhesive strips

If you've smashed or scratched your rear camera lens on your iPhone 15 Pro Max, you will need to replace the glass camera lens.

Product Features:

• 100% Brand New
• 3x Camera lens inner pieces
• includes adhesive

• Type: Glass Replacement
• Warranty: 12 Months

• 3x iPhone 15 Pro Max Camera lens replacement
• 3x round adhesive strips

Replace a bent or missing SIM card tray for a single SIM model iPhone 15/15 Plus. This tray holds the nano SIM card and is inserted on the side of the phone.

Part Includes:

• Single Sided Coloured Sim Tray
• Water Resistant rubber gasket
• 12 Month Warranty

• Product Type: Sim Tray
• Colours Available: Blue, Pink, Yellow, Pink, Black
• Tray Type: Single Slot
• Warranty: 12 Months

• 1x iPhone 15/15 Plus Sim Tray

Replace a bent or missing SIM card tray for a single SIM model iPhone 15 Pro/15 Pro Max. This tray holds the nano SIM card and is inserted on the side of the phone.

Part Includes:

• Single Sided Coloured Sim Tray
• Water Resistant rubber gasket
• 12 Month Warranty

• Product Type: Sim Tray
• Colours Available: Grey, Blue, White, Black
• Tray Type: Single Slot
• Warranty: 12 Months

• 1x iPhone 15 Pro/15 Pro Max Sim Tray