Check out the video above for assistance in this repair

---

Here is some tools you may need to help you complete the repair.

• Phillips #000 Screwdriver
• P2 Pentalobe Screwdriver
• Y000 Triwing tri-point Screwdriver
• iSclack opening tool
• Suction Cup
• Fine Tipped Curved Tweezers
• bokotaforschoolboard 5 piece opening picks
• Black Spudger
• uFix iOpener Heat bag
• iHold Evo Screen Holder
• iPhone X Screw Mat

---

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone ((+370)82324614) or by email

• Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
• Always power down your device prior to working on it
• Make sure you always unplug the battery before attemping any component removal

Check out the video above or step by step guide below for assistance in this repair

iFixit iPhone XS Max Teardown

---

Here is some tools you may need to help you complete the repair.

• Phillips #000 Screwdriver
• P2 Pentalobe Screwdriver
• Y000 Triwing tri-point Screwdriver
• iSclack opening tool
• Suction Cup
• Fine Tipped Curved Tweezers
• bokotaforschoolboard 5 piece opening picks
• Black Spudger
• uFix iOpener Heat bag
• iHold Evo Screen Holder

---

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone ((+370)82324614) or by email

• Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
• Always power down your device prior to working on it
• Make sure you always unplug the battery before attemping any component removal
• The connector to the logicboard can be tricky to align correctly so it fits into place, we recommend taking a pencil and tracing the original charging port so you know exactly where it gets positioned and lining the new charger port within the pencil lines
• Don't forget to remove the sim tray when removing the logicboard

• The matte finish eliminates annoying sun glare and reflections
• Can use in any light - including direct sunlight and other bright areas
• Case Friendly - covers all viewable screen and stops at the bezel. Compatible with 99% of cases
• 0.33mm thickness for good flexibility, 4 hour tempering process for increased strength
• Premium silicon automatic adhesive - push the middle and it glides to all corners
• Oleophobic and Hydrophobic Nano coating - repels oils, water, fingerprints and scratches
• 5 premium layers - oleophobic nano coating, ACG glass, anti-shatter layer, PET and Silicon resin and the automatic adhesive layer
• Retains full touchscreen responsiveness through the protector

Watch the video above or checkout the step-by-step guide below as they contain removal of the battery adhesive

---

Here is some tools you may need to help you complete the repair.

• Phillips #000 Screwdriver
• P2 Pentalobe Screwdriver
• Y000 Triwing tri-point Screwdriver
• iSclack opening tool
• Suction Cup
• Fine Tipped Curved Tweezers
• bokotaforschoolboard 5 piece opening picks
• Black Spudger
• Soldering Iron
• uFix iOpener Heat bag
• iHold Evo Screen Holder

---

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone ((+370)82324614) or by email

• Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
• Always power down your device prior to working on it
• Make sure you always unplug the battery before attemping any component removald
• Some simple soldering is required to complete this repair

A typical cellphone battery has about 500 cycles before it is unable to maintain a charge of at least 80% of its original capacity. Made from new materials, our batteries have zero cycles ensuring the maximum number of cycles available to you.

• Zero Cycle Count, therefore you have the maximum amount of cycles left
• Lithium-Ion Polymer
• Brand New materials
• Strict QC testing
• Less than 1% failure rate
• 12 Month Warranty

The OEM Texas Instruments chip (also known as the 'gas gauge') measures and accurately communicates available capacity, voltage, current, temperature and other critical parameters for lithium-ion batteries.  An inadequate battery gas gauge will result in surprise shutdowns, overcharging, poor user experience and will ultimately lead to a quicker deterioration of your battery

• Genuine OEM Texas Instruments Chipset (TIIC)
• Accurate Communication to your device
• Superior charging control - Stabilises charging, discharging and overcharging

bokotaforschoolboard's OEM battery adhesive allows you to glue down the battery into your chassis while leaving pull tabs for you to be able to remove the battery if you need to later on

• OEM Battery adhesive is included
• Convenient
• Easy-to-use

Here is some tools you may need to help you complete the repair.

• Phillips #000 Screwdriver
• P2 Pentalobe Screwdriver
• Y000 Triwing tri-point Screwdriver
• iSclack opening tool
• Suction Cup
• Fine Tipped Curved Tweezers
• bokotaforschoolboard 5 piece opening picks
• Black Spudger
• uFix iOpener Heat bag
• iHold Evo Screen Holder

---

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone ((+370)82324614) or by email

• Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
• Always power down your device prior to working on it
• Make sure you always unplug the battery before attemping any component removal
• This is a bag of all the screws, it is recommended that you put all the screws in groups of screw type and then use the iFixit guides to work out what size screw you need. It is important you don't put the wrong size screw into a hole, it could cause irreparable damage to your device

Watch the video above or step by step guide for assistance in completing this repair

iFixit iPhone XS Max Rear Glass Replacement Guide

---

Here is some tools you may need to help you complete the repair.

• Phillips #000 Screwdriver
• P2 Pentalobe Screwdriver
• Y000 Triwing tri-point Screwdriver
• iSclack opening tool
• Suction Cup
• Fine Tipped Curved Tweezers
• bokotaforschoolboard 5 piece opening picks
• Flying Eagle Razor Blade
• Black Spudger
• uFix iOpener Heat bag
• iHold Evo Screen Holder
• Heat Gun
• B7000 Multipurpose Liquid Glue
• iPhone XS Max iScrews Mat

---

Here are some helpful tips to assist you in completing a safe repair on your device. If you are unsure of something or have any quesions, please feel free to contact us either by phone ((+370)82324614) or by email

• Always track your screws to avoid putting back in the wrong place and damaging your device. You can draw a picture of your phone and tape the screws to the right places or use a screw mat
• Always power down your device prior to working on it
• Make sure you always unplug the battery before attemping any component removal
• Because a heat gun is being used, it is recommended you remove the battery and rear camera first to avoid heat directly on those parts
• The rear glass is heavily glued down, a lot of patience is required to remove the glass
• Do not remove the rear camera lens for this part, you will need to break the glass around it and leave it in place. This rear glass goes over the top of the camera lens

• Blocks the harmful UV and bluelight rays within the 400-480 nanometer range
• Protects you from headaches and sleeplessness that bluelight can cause
• No orange/brown tinge like you find in phone anti-bluelight settings
• Clear and colourless protector - can only see slight blue tinge in certain light

Case Friendly protectors are 2-3mm shorter than the edge of the phone to allow for cases of any size to fit comfortably without affecting the protector

• Smooth 2.5D contoured edging
• Compatible with 99% of cases
• Covers all viewable screen and stops at bezel
• Precise notch cutouts allowing for the camera and Face ID to work unhindered

Why should I use tempered glass?

Japanese Asahi Glass Co is the largest glass company in the world and is widely recognised as one of the top quality glass manufacturers. They supply glass to some of the best screen protector companies in the world thanks to their combination of toughness and flexibility. 

• 9H hardness rating
• 4 hour tempering process for good strength
• 5 premium layers - oleophobic nano coating, ACG glass, anti-shatter layer, PET and Silicon resin and the automatic adhesive layer
• 0.33mm thickness for the best balance of flexibility and strength
• Anti-shatter design to reduce harmful splinters and shards
• Premium silicon adhesive that automatically sticks down to all corners of the protector 

bokotaforschoolboard protectors come with a cleaning kit that has all you need to prepare your phone for installation of your new screen protector. 

• Alcohol cleaning pad to remove any grime
• Microfibre cleaning cloth to dry the screen with no streaks
• Dust removal stickers to clear up any rogue dust

• 100% Ultra HD Clarity to preserve the original sharpness and vibrancy
• Looks and feels like the Original screen
• Oleophobic and Hydrophobic Nano coating which repels oils, water, fingerprints and scratches
• Retains full touchscreen responsiveness through the protector

Case Friendly protectors are 2-3mm shorter than the edge of the phone to allow for cases of any size to fit comfortably without affecting the protector

• Smooth 2.5D contoured edging
• Compatible with 99% of cases
• Covers all viewable screen and stops at bezel
• Precise notch cutouts allowing for the camera and Face ID to work unhindered

Why should I use tempered glass?

Japanese Asahi Glass Co is the largest glass company in the world and is widely recognised as one of the top quality glass manufacturers. They supply glass to some of the best screen protector companies in the world thanks to their combination of toughness and flexibility. 

• 9H hardness rating
• 4 hour tempering process for good strength
• 5 premium layers - oleophobic nano coating, ACG glass, anti-shatter layer, PET and Silicon resin and the automatic adhesive layer
• 0.33mm thickness for the best balance of flexibility and strength
• Anti-shatter design to reduce harmful splinters and shards
• Premium silicon adhesive that automatically sticks down to all corners of the protector 

bokotaforschoolboard protectors come with a cleaning kit that has all you need to prepare your phone for installation of your new screen protector. 

• Alcohol cleaning pad to remove any grime
• Microfibre cleaning cloth to dry the screen with no streaks
• Dust removal stickers to clear up any rogue dust

• Blocks harmful UV bluelight rays within the 400-480 nanometer range
• Reduces headaches and sleeplessness
• Same screen colours - No orange/brown tinge like you find in phone anti-bluelight settings
• Case Friendly - covers all viewable screen and stops at the bezel. Compatible with 99% of cases
• 0.33mm thickness for good flexibility, 4 hour tempering process for increased strength
• Premium silicon automatic adhesive - push the middle and it glides to all corners
• Oleophobic and Hydrophobic Nano coating - repels oils, water, fingerprints and scratches
• 5 premium layers - oleophobic nano coating, ACG glass, anti-shatter layer, PET and Silicon resin and the automatic adhesive layer
• Retains full touchscreen responsiveness through the protector

Bid farewell to all your screen protection woes with this sleek iPhone screen protector made from high-grade Japanese Asahi tempered glass. With its revolutionary design—a 9H hardness rating and 5 premium layers—you get a screen protector that is designed to withstand impact while offering your phone complete protection.

 

Wondering what’s in the layers? Get hydrophobic and oleophobic nano-coating (for smudge protection), ACG glass (quality, flexibility, and durability), anti-shatter layer (for your protection), PET resin and Silicon resin (UV and scratch resistant).

 

Install the 6.5" iPhone XS Max (A1921, A2101, A2102 & A2104) or iPhone 11 Pro Max (A2161, A2218 & A2220) screen protector confidently, like a pro, with the cleaning kit that includes an alcohol cleaning pad, microfiber cleaning cloth and dust removal stickers.

• 100% Ultra HD Clarity - preserves original sharpness and vibrancy
• Case Friendly - covers all viewable screen and stops at the bezel. Compatible with 99% of cases
• 0.33mm thickness for good flexibility, 4 hour tempering process for increased strength
• Premium silicon automatic adhesive - push the middle and it glides to all corners
• Oleophobic and Hydrophobic Nano coating - repels oils, water, fingerprints and scratches
• 5 premium layers - oleophobic nano coating, ACG glass, anti-shatter layer, PET and Silicon resin and the automatic adhesive layer
• Retains full touchscreen responsiveness through the protector