The ReLife RL-066 glass blaster pen is made of aluminum alloy material, compact and easy to carry, which has passed strict quality control, you can use it with confidence. The pen-shaped design is more convenient to operate, better control during operation. Can be rotated to adjust the force, does not damage the back cover accessories of the phone.

The diameter of this phone glass breaker is 14mm, convenient to carry and suitable for phone repairing, can meet your daily use needs. Can be adjusted in blast strength to make sure no other damage will be caused, other then cracking your back cover or camera lens.

Features:

• Adjustable Strength: According to different models of mobile phones, the impact force can be reasonably adjusted by rotating the rear cover assembly to ensure that the back cover is not damaged.
• Imported Material Tungsten Pen Point: Special imported thungsten steel material, hard polished, ingenious quality, precise dismantling.
• Easy and Effortless: Applicable for disassembly and repair of lens module.
• Ergonomic Design: Smooth corners, comfortable grip
• Anti-Slip Technology: Surface sandblasting treatment, environmental protection and wear resistance, increase friction and improve hand feeling.
• Safety Cover Design: The protective cover can be covered when it is not in use to prevent accidental injury from the sharp pen tip.
• Small and Portable: Made of lightweight alloy material, the overall weight is 33g, compact and easy to carry.

• 1x ReLife RL-066 Glass Blaster Pen

iHold is a great tool for when you connect up those tricky flex cables, this will also help avoid damaging the flex cables as the iHold will hold the LCD perfectly in place, The iHold acts like your third hand to allow you to free up both your other hands.

 

Enjoy a quality of life improvement you never knew you needed!

 

Tool Features:

• Holds LCD Screen Out of the Way During Repairs
• Anchors hold the phone steady with strategic gaps to cater for buttons
• Portable and Lightweight Design
• 1 Year Warranty Included
• Authentic Dottorpod

Suits iPhone and iPads including:

• iPhone 5
• iPhone 5c
• iPhone 5s
• iPhone SE

• 1x Genuine iHold Screen Holding Opening Tool

The Jakemy Pro Opening Roller Tool with high strength stainless steel forging is corrosion resistant and doesn't rust. The fishtail and spinning head roller is a labor-saving patented design.

Use caution when using this tool. Because it is metal, it has the potential to scratch or otherwise damage components that might be better served with plastic tools such as the bokotaforschoolboard plastic card or iPlastix.

Suitable for all electronic devices

• 1x Jakemy Pro Opening Roller Tool

The unique design of recent iMac models requires the cutting of the foam tape on the display to get inside. The handle is made of reinforced nylon and easily accommodates the cutting wheel while providing plenty of grip. In addition, the back of the handle features a thin prying and slicing blade to ensure you loosen all the adhesive. The cutting wheel is specifically designed to slip in the hair-thin gap between the display and the aluminum frame, then easily cut the foam holding the two pieces together.

• 1x iMac Screen Disassembly roller tool

The new and improved iSlack from Dottorpod has been designed from the ground up to take on bigger, heavier, and newer devices. This handy tool works to effectively pry apart gadget screens without damaging the frame or any internal components. This generation of the iSlack introduces an ingenious locking system which uses pressure to automatically separate the screen from device

 

Tool Features:

• Industrial Strength Suction Cups
• Stable Grip
• Fitted with a plastic guide to stop you opening too far
• 1 Year Warranty Included
• Authentic Dottorpod

 

Suitable for all electronic devices that need screens or rear covers pulling away from frame

• 1x Dottorpod iSclack Suction Cup Opening Tool
• 2x Screen Adhesive strips for covering broken glass

Having hard plastic prying tools is handy to have to remove glued down components. You can't aways use metal tools because they can damage the frame of puncture components, but you cannot always use plastic because it is not strong enough. These plastic pry cards solve both of those problems. They are thin 360 degrees around the outside of the card but get thicker towards to the centre to add strength to the pry cards

Every professional repairer will have one of these to get the job done right

 

Features Include:

• 3x Hard Plastic Pry Bars
• Thumb circle so it is easy to hold and manuevour 
• 60mm x 70mm
• Thin edges that widen up to 10mm towards the centre
• Can be used 360 degrees

 

Type: Plastic Pry Board
Size: 60mm x 70mm 
Material: Plastic

• 1x Hard Plastic Pry Bar Opening Tool

The Ultra Thin Metal Opening tool is used to get between screen and frame on mobile phones and tablets to gain access to remove glass. This tool is a must have due to its flexibility and ability to bend easily but is stronger than other materials at this thickness.

Use caution when using this tool. Because it is metal, it has the potential to scratch or otherwise damage components that might be better served with plastic tools such as the bokotaforschoolboard plastic card or iPlastix.

Suitable for all electronic devices

• 1x Ultra Thin Metal Pry Bar

One of the most frustrating things in replacing the battery in a device these days is that it is glued down well. If the pull tabs break and you have to pull it out with force, it is almost impossible to get the battery out without significantly bending the battery. This can be dangerous and could cause damage to your device. 

The bokotaforschoolboard battery pry bar helps you pry the battery out without bending edges and can be used to slice the battery adhesive as you go along. 

Every professional repairer will have one of these to get the job done right

 

Features Include:

• Plastic Pry Bar
• 9cm x 6cm 
• Can be used for spreading thermal paste or glues
• Can be used vertically or horizontally

 

Brand: Jia Fa
Type: Battery Pry Board
Net weight: approx 9g
Size: 90mm x 60 mm 
Material: Plastic

• 1x Battery Pry Bar Opening Tool

The bokotaforschoolboard medium size ESD Anti-Static tweezers are perfect for removing and installing tiny screws and components on electronic devices. It is made from strong Stainless Steel with a Anti-Static coating to ensure your electronic device is safe. The tips are precise to make picking up small items easy and are non magnetised.

L 145mm x W 90mm x D 4mm

All Electronic Devices

• 1x bokotaforschoolboard ESD Anti-Static Stainless Steel Straight Tweezers

If a customer comes in with a phone that doesn't charge unless you put the cable on an angle, chances are that the charger port is just dirty. Fluff and debris from your pocket build up and stop your cable from sitting in the phone properly and it gets worse the more you cram the debris to the back with the charger.

We have tested numourous different products and plastic and wood utensils searching for something that is flexible but is still strong enough to really dig out the corner debris. Finally we have settled on a safe, plastic tool that will allow you to loosen and pull the debris out of the port easily without risk of electrical damage. Fix a charger port in minutes! A must have for every mobile repairers toolbox.

Best used in conjunction with compressed air. 

 

All devices that have a charging port

• 5x bokotaforschoolboard Plastic Charger Port Cleaning tools

The Heavy Duty large blue suction cup is an upgrade on the smaller versions with a built-in locking clamp that adds a stronger suction and larger handles to make pulling easier. It is designed to attach to glass so you can pull and create a gap to gain access inside or to remove iMac glass. Perfect for disassembly of iPhones, iPads, iMacs, Macbooks, Samsungs and Huawei devices.

 

Specifications:

• Suction Cup Type: Round
• Dimensions: 57mm
• Weight: 22g
• Colour: Blue

 

How to Use:

1. Push the moveable handle down to a horizontal position
2. Place the suction cup onto a smooth area of glass
3. While keeping pressure on the suction cup, pull up the horzontal handle to meet the vertical handle
4. It will now be locked in place and ready for use

If you find it is not sealing properly, run water over the suction cup and let it dry and try again

• iPhone
• iMac
• Macbook
• iPad
• Samsung devices
• Huawei devices
• other devices that have glass surfaces

• 1x bokotaforschoolboard Heavy Duty Large Blue Suction Cup with locking arm

The bokotaforschoolboard Exacto knife is perfect for cutting, scraping and prying. The #17 blade is often used by repair professionals to scrape up adheisve that is left underneath glass, screens and batteries.

• 10x #17 blades 
• Super sharp blades made of Stainless Steel
• Blade storage box included
• Similar specs and style to X-acto knife blades

Please Note: Blades are extremely sharp, keep away from children and always store with safety cap on.

Perfect for cutting, scraping and prying

• 10x #17 Blade

The bokotaforschoolboard Exacto knife is perfect for cutting, scraping and prying. The #11 blade is often used by repair professionals to cut and shape adhesive to the frame of tablets and phones

• 5x #11 blades 
• Super sharp blades made of Stainless Steel
• Blade storage box included
• Similar specs and style to X-acto knife blades

Please Note: Blades are extremely sharp, keep away from children and always store with safety cap on.

Perfect for cutting, scraping and prying

• 5x #11 Blade

The bokotaforschoolboard Exacto knife is perfect for cutting, scraping and prying. Often used by professionals to scrape up adheisve that is left underneath glass, screens and batteries.

• Solid Oxidation-Resistant Aluminium body
• 6x #11 blades 
• Super sharp blades made of Stainless Steel
• Adjustable chuck head fixes the blade in place
• Safety cap included
• Blade storage box included
• Similar specs and style to X-acto knife

Please Note: Blades are extremely sharp, keep away from children and always store with safety cap on.

Perfect for cutting, scraping and prying

• 1x bokotaforschoolboard Exacto Technician blade
• 6x #11 Blade

The bokotaforschoolboard Plastic prying picks are a must have in a repairers toolbox for a range of jobs when opening devices. They are ultra thin and flexible which is perfect for popping connectors on the back of Samsung tablets or laptop screens, they are great for sliding down iPad glass to cut adhesive and a must have for placing at certain points when opening iPads to make sure the glue doesn't settle down again.

Specifications:

• Material: Plastic
• Size: 30mm
• Colour: Blue

All electronic devices

• 5x bokotaforschoolboard Plastic Pry Triangle Opening Picks

The large blue suction cup is an upgrade on the smaller versions and adds a stronger grip and easier pull. It is designed to attach to glass so you can pull and create a gap to gain access inside. Perfect for opening iPhones or removing back glass on Samsung and Huawei devices.

Specifications:

• Suction Cup Type: Round
• Dimensions: 5.5cm
• Weight: 12g
• Colour: Blue

for glass surfaces

• 1x bokotaforschoolboard Large Blue Suction Cup

The metal spudger is perfect for prying up glass on tablets and the pointed side is the perfect size for getting under and removing keyboard keys from desktop, laptop and macbook keyboards. 

• While our first-choice tool for poking and prying is always our trusty plastic spudger, sometimes you need a little more power behind your pry. In those instances, this metal spudger is the ideal tool for the job.
• Features a comfortable, easy-grip handle and is great for prying up all sorts of tough components.
• Made of High Quality tough Stainless Steel
• Non-slip textured handle
• Dual tipped - long spade and round pointed side

Please Note: Be sure to exercise caution when using this tool. With its great strength comes the potential to scratch or otherwise damage components that might be better served with plastic tools such as a spudger or plastic opening tool.

All Electronic Devices

• 1x bokotaforschoolboard Dual-Headed Metal Spudger

The Mechanic AK King Red tweezers are used by professional electronic repairers all around the world. They are popular because of their reliability, precise and accurate designs and longevity.

The Straight ESD Anti-Static tweezers are perfect for removing and installing tiny screws and components on electronic devices. It is made from strong Stainless Steel with a Anti-Static red coating to ensure your electronic device is safe. The tips are precise to make picking up small items easy and are non magnetised to prevent headaches when trying to install metal components.

• Professional Mechanic AK King Red AK-11 Straight tweezers
• Made from High Grade Stainless Steel
• Non Magnetic
• Anti-Acid
• Compact and Comfortable to use
• High Precision with accurate tips

L 140mm x W 90mm x D 4mm

All Electronic Devices

• 1x Mechanic AK-11 King ESD Anti-Static Stainless Steel Striaght Tweezers

The Mechanic AK King Red tweezers are used by professional electronic repairers all around the world. They are popular because of their reliability, precise and accurate designs and longevity.

The Curved ESD Anti-Static tweezers are perfect for removing and installing tiny screws and components on electronic devices. It is made from strong Stainless Steel with a Anti-Static red coating to ensure your electronic device is safe. The tips are precise to make picking up small items easy and are non magnetised to prevent headaches when trying to install metal components.

• Professional Mechanic AK King Red AK-15 curved tweezers
• Made from High Grade Stainless Steel
• Non Magnetic
• Anti-Acid
• Compact and Comfortable to use
• High Precision with accurate tips

L 115mm x W 90mm x D 4mm

All Electronic Devices

• 1x Mechanic AK-15 King ESD Anti-Static Stainless Steel Curved Tweezers

The bokotaforschoolboard medium size ESD Anti-Static tweezers are perfect for removing and installing tiny screws and components on electronic devices. It is made from strong Stainless Steel with a Anti-Static coating to ensure your electronic device is safe. The tips are precise to make picking up small items easy and are non magnetised.

L 120mm x W 90mm x D 4mm

All Electronic Devices

• 1x bokotaforschoolboard ESD Anti-Static Stainless Steel Curved Tweezers

The Flying Eagle blades are used by repairers all around the world because of their versatility. They are small enough to clean frames on tablets and sharp enough to remove glass from a broken camera lens

Suitable for a range of tasks that require a sharp blade

• removing adhesive from tablet frames
• removing glue from under glass during refurbishment
• getting the glass camera lens out of the frame
• and more....

• 1x Flying Eagle single edged razor blade

The Jakemy Screen Holder is the most versatile screen holder with its ability to hold the phone in the adjustable clips while allowing the screen to lock in a position that is easiest to work on for you while not causing strain on the flex cables. Gone are the days of holding the phone and screen in position in one hand, and the screwdriver and screws in the other. Free your hands to do the job right.

Easy to apply, easy to use! A must have for repairers who work on iPhones

Suits iPhones including:

• iPhone 6
• iPhone 6 Plus
• iPhone 6s
• iPhone 6s Plus

• 1x Jakemy Screen Holding Opening Tool
• 1x Philips Screwdriver
• 1x Pentalobe Screwdriver
• 1x Flat Head Screwdriver

UFIX iOpener Heating Bag Opening Tool to Melt Adhesive for Tablets and Smartphones

This kit is designed to service every generation of Apple iPad, but can also be used for many more devices. As a whole, the iPad lineup has never been easy to repair. Since the second generation, all iPads have been sealed shut with copious amounts of glue, deterring many would-be repairs. Previously, the only way to open an iPad was to blast the perimeter of the tablet with a heat gun to melt the adhesive. While this method will indeed open an iPad, it is very difficult. Add that to the possible side effects of warping the LCD, melting exposed plastic components—such as the home button—and burning your fingers, and you have a recipe for a headache.

The iOpener was designed to apply the same heat as a wily heat gun, but in a much easier, safer, compact and more sustainable way. By using a material with a high heat capacity, the iOpener can easily transfer heat from one place to another. The iOpener is heated in a microwave for 60 seconds, and then laid across the surface of the iPad, applying heat only where it is necessary. In this way, the iOpener has a huge advantage over the heat gun method.

How to use:

1. Clean the microwave to prevent dirt sticking to the bag.
2. Set time for no longer than 2 minutes (more than 2 minutes can overheat bag)
3. Place on section of the screen that you are wanting to access
4. Use appropriate tool to open screen, slowly moving underneath the section with the bag on.
5. If moving through adhesive becomes hard reheat the bag in microwave

• Tool Type: Hand Tool
• Glue-Laden opening device Application: for iPad,Tablets and Smartphones
• Dimension: 26x6cm
• Net Weight: 160g (5.64 OZ)
• Heating Method: Microwave
• Heating Time: 1-2 Minutes

• 1x Ufix iOpener Microwaveable Opening Bag

A first of its kind in the mobile phone repair market, the Dottorpod iHold Evo Opening Tool makes great use of the iPhone’s lightning port to hold up the LCD while you get working! No more accidental damage to flex cables!

 

The iHold Evo is a holding tool that uses a device’s lightning port as an anchor at one end and the other end is a clamp that holds the panel at a set position so you can get repairing with both hands free. The tool works on all iPhone models from the 5, all the way to the current generation no matter which direction the screen opens in.

 

Enjoy a quality of life improvement you never knew you needed!

 

Tool Features:

• Holds LCD Screen Out of the Way During Repairs
• Flexible Silcon Wire Cord that Stays in Place once Positioned
• Uses Lighting Port Connector as Anchor
• Portable and Lightweight Design
• 1 Year Warranty Included
• Authentic Dottorpod

Suits iPhone and iPads including:

• iPhone 5
• iPhone 5c
• iPhone 5s
• iPhone SE
• iPhone 6
• iPhone 6 Plus
• iPhone 6s
• iPhone 6s Plus
• iPhone 7
• iPhone 7 Plus
• iPhone 8
• iPhone 8 Plus
• iPhone X
• iPhone XS
• iPhone XR
• iPhone XS Max
• iPhone 11
• iPhone 11 Pro
• iPhone 11 Pro Max
• iPhone 12 Mini
• iPhone 12
• iPhone 12 Pro
• iPhone 12 Pro Max
• iPhone 13 Mini
• iPhone 13
• iPhone 13 Pro
• iPhone 13 Pro Max
• iPhone SE 2020
• iPad 4
• iPad 5 (2017)
• iPad 6 (2018)
• iPad 7 (2019)
• iPad 8 (2020)
• iPad 9 (2021)
• iPad Mini
• iPad Mini 2
• iPad Mini 3
• iPad Mini 4
• iPad Mini 5
• iPad Mini 6
• iPad Air
• iPad Air 2
• iPad Air 3
• iPad Pro 9.7"
• iPad Pro 10.5"
• iPad Pro 12.9" (Gen 1, 2)

• 1x Genuine iHold Evo Screen Holding Opening Tool

Delicate jobs need delicate tools to get the job done. And that’s exactly what the Dottorpod iPlastix Plastic Flexible Opening Tool is here to do. With its ultra-thin 0.35mm construction, flexible plastic material, and ergonomic grip, the iPlastix makes precision repair jobs on delicate devices easier than ever, and stands as the perfect alternative to our lineup of metal opening tools.

 

Tool Features:

• 0.35mm Ultra-thin
• Pops open delicate electronic casings without damaging components
• Ergonomic Grip
• Smart Tip Design
• 1 Year Warranty Included
• Authentic Dottorpod

Suitable for all electronic devices

• 1x iPlastix Flexible Opening Tool